How to Install Laminate Flooring: A Step-by-Step Guide
Any place can be transformed using laminate flooring as it has a very stylish appeal. Also, it is very durable, and comes with an easy-to-handle installation process.
Whether with grey laminate flooring for a modern touch or laminate wood flooring for a warm feel, the installation makes it last for years with a beautiful appearance. Here is a full detailed guide on how to install laminate flooring like a pro.
Preparation for Installation in the Room
First, you will have to clean the entire room of furniture and remove old flooring to prepare the room for the installation of laminate flooring. Clean everything in the room and the subfloor. Unless you can fix uneven areas with a leveling agent, it should be dry and level.
Measure the area for the amount of laminate flooring needed, and get a few extra planks in case of mistakes or future repairs.
Collect All the Right Tools
With all the right tools, it makes it easier and faster for laminate flooring installation. Here are the tools you will require:
Tape measure
Utility knife
Rubber mallet
Tapping block
Spacers
Saw or laminate cutter
Underlayment (if required)
Next, Buy Lowe's laminate flooring, and check the manufacturer's guide for specific tool recommendations.
Lay the Underlayment
The underlayment absorbs impact and prevents moisture infiltration. Some vinyl laminate floors come with built-in underlayment; therefore, you often need to attach a separate layer. Roll out the underlayment, cut it to measurements and fit the space. Keep smooth edges and no overlaps.
The First Row of Laminate Flooring Laid
Place fillers along the walls in the room's corner, leaving little space for side extension. The first plank goes down flat, then click the second plank by angling it and pressing down. Continue the row, cutting the last piece if needed.
Staggering seams and starting the other row with a shorter plank give it a natural look and better stability.
Continue Installing the Floor
Click every plank into place but tight. Use a tapping block and rubber hammer or mallet to tighten the joints. Always check the alignment to keep straight lines. If installing grey laminate flooring or other designs, mix and match shades to create a natural look.
This should continue until the very end of the flooring. For circles or uneven spaces, cut the planks accordingly.
Complete the Installation
Laminate flooring offers complete installation after removing spacers and then nailing the baseboards. It hides the expansion gap, making it look fabulously finished. Take a quick check for loose planks and give a good press down.
How To Clean Laminate Flooring
Keeping laminate flooring clean gives the best floor surfaces as new. Sweep or vacuum it. For deeper cleaning, use a damp mop combined with a laminate-safe cleaner. Do not saturate it with water because it could weaken and damage the planks.
Wipe spills when they happen. Proper knowledge of how to clean laminate flooring prevents stains and scratches.
Final Thoughts
The installation of laminate floors is quite an uncomplicated project adding to the style and value of your home. Well, whether one ends up going for laminate wood flooring, or even grey laminate flooring, it ensures that these steps followed would get one to complete that flawless finish.
The best and premium-quality laminate flooring, available in all styles and colors, is available at Global Carpets. Explore the collection to get your hands on a new and sophisticated beauty for your house!